Garage Door Service & Spring Replacement Tips and Advice
The garage is the most sensitive place of your house that needs proper protection and care. There are many times when the garage door spring gets damaged. If you don’t know how to tackle this situation, you are in a real problem. Getting a technician from Garage Door Repair Mount Dora its a simple it will save your time. Spending a whole day waiting and supervising a technician is surely the last thing you want to do on a splendid weekend. Here are some tips that will help you from Garage Door Repair Mount Dora. These are really simple steps.
Of course, the first thing to do is to get fully aware of the physical properties of the spring. It will help you in understanding the process and will also save you from any further complications. You must measure the all the dimension of the spring. Here are some of the dimensions you must be very conscious about.
- The fashion of winding of the spring. Having a left hand winding spring for opposite fitting will be a total disaster.
- The length of the spring with no external force applied.
- The inner and outer diameter of the spring.
- The thickness of the spring.
Shop a new one
Go to your nearby hardware store. Present the store keeper your measurements and buy the new spring. Make sure it is identical to the spring you just examined. Taking the older spring with you will also be helpful. The Garage Door springs are often available in pairs. It is advised that you must consider buying the whole pair. If one spring gets damaged, you must replace the both of Garage Door springs.
There is no workman without proper tools. The next step is to find the perfect set of tools to accomplish the task. Specifically, in this case, you will need to have screwdrivers, pliers, wrenches and other protection tools. You will also need a power drill and oil can.
Remove the older spring
You must remove the older Garage Door springs. Regardless of the fact that maybe one is damaged and the other is not, but you must remove both so that you don’t get to do this rigorous procedure again after a few weeks. Wrench lose the older springs and also remove the lift. Shaft drums must also be removed to make sure that no complication will not be interfaced in the future.
Remove the broken spring and install the new one. Before that, you must measure the two springs accurately. If a single diameter is measured or compared casually, it can lead us to extensive hard work and wastage of time.
Wind the spring
The next step is to count the turns in the old Garage Door springs and then wind the new one. It is a very simple and easy process. There is a test that lets you know whether you are winding right or wrong. Keep a complete record of the turns on the previous coil. You can do that easily by chalking down the both springs and compare them.
Submit your review